Drawer Machine
Triad’s clean, uncomplicated Drawer Machine will speed your production & give you years of trouble-free service. You will find this machine operating in facilities all over North America.
Triad’s Drawer Machine comes equipped with two safety switches. Drawer height is also automatically determined by the two sensors. If no material is present, the tools will not activate. Once stapled, the tools will shut off, retract and the machine opens up for removal of finished drawer.
Push button controls operate the machine.The positive two direction squaring and clamping is controlled by regulated air pressure. Quality castings and machined parts assure you many years of service and minimal down time. The tools cycle in approximately three seconds. Operator controls can be user-selected for either manual or automatic clamp release.
Specifications
- Electrical Standard: 240 V, 3 PH, 8 AMPs
- Air Requirements: 1/2 NPT at 100 PSI
- Size: 4’ Height x 6.5’ Length x 4’ Width
- Weight: Approx. 1000 lbs.
Video Demonstration of Drawer Machine
Capabilities
- Drawer Depth: 18″ to 24″
- Drawer Width: 7″ to 36″
- Drawer Height: 0″ to 12″
Do You Have any Questions?
Ask it NOW via our Quick Question Form Or, if you prefer, feel free to call the factory at 1-800-568-7423 ext. 133 Email direct: sales@merrickmachine.com
WORKING TIME
Available to help you from 8am-5pm Central time weekdays.
- Mon–Fri: 08:00–5:00
- Sat: Closed
- Sun: Closed
Built for Repeatable Drawer Production
The Drawer Machine squares, clamps and staples a drawer box in one cycle. Two sensors set drawer height automatically, the tools will not fire unless material is present, and once stapling is done the tools retract and the machine opens so the finished drawer can be removed. With a cycle time of about three seconds, it suits shops that build drawers in volume.
The machine handles drawers 18 to 24 inches deep, 7 to 36 inches wide and up to 12 inches tall, and runs on 240 V three-phase power with 100 PSI air. Like all Triad equipment, it is built by Merrick Machine Company in Alda, Nebraska. Have a question about your drawer sizes? Use our contact page.